• What is this
• Introduction
• Script-based installation
  • Install dependencies
  • Install packages
• Manual installation
  • Install required packages
  • Create required files
    • EL6 repo file
    • EL7 repo file
  • Update cache
  • Install packages manually
• Conclusion

This is a detailed explanation on how to install ready-to-use ClickHouse RPMs from Altinity's repos (either general repo or stable repo) located on packagecloud.io. This is not an instructions on how to build your own hand-made RPMs. However, if you need to build your own RPMs, there is a detailed explanation on how to build ClickHouse RPMs from sources with the help of Altinity's RPM builder

Altinity provides two repos:

• general repo with general ClickHouse releases.
• stable repo with Altinity Stable ClickHouse releases.

All instructions in this manual were tested on Centos 6.10, CentOS 7.5 and Amazon Linux 2.

IMPORTANT for Amazon Linux users Amazon Linux is being detected as CentOS 6, while RPMs built for CentOS 7 are the best choice. So we need to explicitly install CentOS 7 RPMs More details further in the doc.

In order to install ClickHouse RPM packages from Altinity's repo, we need to register it (repo) with our yum, making yum aware of additional packages installable from external source.

In general, repositories are listed in /etc/yum.repos.d folder, so we need to add Altinity's repo description in there.

This can be done either manually or via script, provided by packagecloud.io. In any case, as a result, we'll have ClickHouse packages available for installation via yum.

IMPORTANT for Amazon Linux users Amazon Linux is being detected as CentOS 6 by the script, so we need to explicitly instruct it to use CentOS 7 repo.

• In case of manual installation, just use EL7 repo file. It is compatible with Amazon Linux
• In case of script-based installation, script provided by packagecloud should be explicitly instructed to use CentOS 7 repo, instead of CentOS 6 repo, which is being used by default for Amazon Linux. More details further in the doc.

Let's start with script-based installation, since this approach looks like more user-friendly.

For our convenience,packagecloud.io provides nice and user-friendly way to add repos with their shell script. We'll need to download and run packagecloud's shell script, which will do all required steps.

Installation process requires curl in order to download packages. ClickHouse test package has some dependencies in EPEL, so epel-release has to be installed as well, in case you'd like to install ClickHouse test package. Some installations do not have sudo installed, so we need to ensure it is availbale also.

Ensure sudo is available:

yum install -y sudo

Ensure curl is available:

sudo yum install -y curl
# in case test package would be installed, add epel-release
sudo yum install -y epel-release

Let's download and run installation shell script, provided by packagecloud.io. First of all, we need to point what script (from general or stable repo) we'll be using:

# For 'general' repo use this URL:
SCRIPT_URL="https://packagecloud.io/install/repositories/altinity/clickhouse/script.rpm.sh"

# For 'stable' repo use this URL:
SCRIPT_URL="https://packagecloud.io/install/repositories/altinity/clickhouse-altinity-stable/script.rpm.sh"

Now we can register Altiniry's repo in the system by running appropriate script.

for CentOS 6 and 7:

curl -s "${SCRIPT_URL}" | sudo bash

for Amazon Linux:

curl -s "${SCRIPT_URL}" | sudo os=centos dist=7 bash

pay attention to os=centos dist=7 explicitly specified.

At this point we have yum aware of additional RPM packages available.

We are ready to install ClickHouse.

First of all, ensure we have ClickHouse packages available for installation

sudo yum list 'clickhouse*'

ClickHouse packages should be listed as available, something like this:

Available Packages
clickhouse-client.x86_64            19.13.3.26-1.el7      Altinity_clickhouse
clickhouse-common-static.x86_64     19.13.3.26-1.el7      Altinity_clickhouse
clickhouse-compressor.x86_64        1.1.54336-3.el7       Altinity_clickhouse
clickhouse-debuginfo.x86_64         19.13.3.26-1.el7      Altinity_clickhouse
clickhouse-odbc.x86_64              1.0.0.20190611-1      Altinity_clickhouse
clickhouse-server.x86_64            19.13.3.26-1.el7      Altinity_clickhouse
clickhouse-server-common.x86_64     19.13.3.26-1.el7      Altinity_clickhouse
clickhouse-test.x86_64              19.13.3.26-1.el7      Altinity_clickhouse

There are multiple packages available (new versions and old tools as well), some of them are deprecated already, so there is no need to install all available RPMs.

Now let's install ClickHouse main parts - server and client applications.

In case we'd like to just install latest ClickHouse (it is so in most cases), we can simply install clickhouse-server and clickhouse-client as following:

sudo yum install -y clickhouse-server clickhouse-client

However, sometimes we'd like to install specific version of ClickHouse.

We can either just want to install latest version from specific branch, or we may know what ClickHouse version we'd like to install exactly, or we can look over availbale (older) versions available for installation. These cases are little bit different, let's take a look on both of them.

Select latest version from specific branch

In case we'd like to install latest version of 19.11.X.Y family, we can list available latest 19.11.* packages

sudo yum list 'clickhouse*19.11.*'

We'll see packages of one proposed version (latest) only:

Available Packages
clickhouse-client.x86_64         19.11.9.52-1.el7
clickhouse-common-static.x86_64  19.11.9.52-1.el7
clickhouse-debuginfo.x86_64      19.11.9.52-1.el7
clickhouse-server.x86_64         19.11.9.52-1.el7
clickhouse-server-common.x86_64  19.11.9.52-1.el7
clickhouse-test.x86_64           19.11.9.52-1.el7

Select specific version from specific branch

In case we'd like to see all available versions of 19.11.X.Y family, then select preferred version out of availbale for installation:

sudo yum list 'clickhouse*19.11.*' --showduplicates

We'll see all available package versions from 19.11.X.Y family:

Available Packages
clickhouse-client.x86_64         19.11.2.7-1.el7
clickhouse-client.x86_64         19.11.3.11-1.el7
clickhouse-client.x86_64         19.11.4.24-1.el7
clickhouse-client.x86_64         19.11.6.31-1.el7
clickhouse-client.x86_64         19.11.7.40-1.el7
clickhouse-client.x86_64         19.11.8.46-1.el7
clickhouse-client.x86_64         19.11.9.52-1.el7
clickhouse-common-static.x86_64  19.11.2.7-1.el7
clickhouse-common-static.x86_64  19.11.3.11-1.el7
clickhouse-common-static.x86_64  19.11.4.24-1.el7
clickhouse-common-static.x86_64  19.11.6.31-1.el7
...
and more

Install specific version

By now, we have picked up specific version (out of available) - let's install it:

sudo yum install -y clickhouse-server-19.11.7.40 clickhouse-client-19.11.7.40

and verify it is listed as installed

 sudo yum list installed 'clickhouse*'

ClickHouse packages should be listed as installed, something like this:

Installed Packages
clickhouse-client.x86_64                 19.11.7.40-1.el7           @Altinity_clickhouse
clickhouse-common-static.x86_64          19.11.7.40-1.el7           @Altinity_clickhouse
clickhouse-server.x86_64                 19.11.7.40-1.el7           @Altinity_clickhouse
clickhouse-server-common.x86_64          19.11.7.40-1.el7           @Altinity_clickhouse

Ensure ClickHouse server is running

sudo /etc/init.d/clickhouse-server restart

And connect to it with clickhouse-client

clickhouse-client

ClickHouse server should respond, something like this:

ClickHouse client version 19.11.7.40.
Connecting to localhost:9000 as user default.
Connected to ClickHouse server version 19.11.7 revision 54423.

ip-172-31-37-226.ec2.internal :)

Well, all looks fine and ClickHouse installed from RPM packages!

We are all done!

Let's add any of Altinity's repos - general or stable manually

We'll need the following packages installed beforehands:

• pygpgme - helps handling gpg-signatures
• yum-utils - contains tools for handling source RPMs
• coreutils - contains core utils and we'll need tee command later
• epel-release - contains ClickHouse test package dependencies

sudo yum install -y pygpgme yum-utils coreutils epel-release

Now let's create yum's repository configuration file: /etc/yum.repos.d/altinity_clickhouse.repo. Depending on what CentOS version you are running you may need files for EL 6 or 7 version.

# For 'general' repo use this URL
BASE_URL="https://packagecloud.io/altinity/clickhouse"

# For 'stable' repo use this URL
BASE_URL="https://packagecloud.io/altinity/clickhouse-altinity-stable"

EL6 (do NOT use with Amazon Linux) ready-to-copy+paste command to create yum's repo config file.
It writes /etc/yum.repos.d/altinity_clickhouse.repo file:

cat <<EOF | sudo tee /etc/yum.repos.d/altinity_clickhouse.repo
[altinity_clickhouse]
name=altinity_clickhouse
baseurl=${BASE_URL}/el/6/\$basearch
repo_gpgcheck=1
gpgcheck=0
enabled=1
gpgkey=${BASE_URL}/gpgkey
sslverify=1
sslcacert=/etc/pki/tls/certs/ca-bundle.crt
metadata_expire=300

[altinity_clickhouse-source]
name=altinity_clickhouse-source
baseurl=${BASE_URL}/el/6/SRPMS
repo_gpgcheck=1
gpgcheck=0
enabled=1
gpgkey=${BASE_URL}/gpgkey
sslverify=1
sslcacert=/etc/pki/tls/certs/ca-bundle.crt
metadata_expire=300
EOF

EL7 and Amazon Linux ready-to-copy+paste command to create yum's repo config file.
It writes /etc/yum.repos.d/altinity_clickhouse.repo file:

cat <<EOF | sudo tee /etc/yum.repos.d/altinity_clickhouse.repo
[altinity_clickhouse]
name=altinity_clickhouse
baseurl=${BASE_URL}/el/7/\$basearch
repo_gpgcheck=1
gpgcheck=0
enabled=1
gpgkey=${BASE_URL}/gpgkey
sslverify=1
sslcacert=/etc/pki/tls/certs/ca-bundle.crt
metadata_expire=300

[altinity_clickhouse-source]
name=altinity_clickhouse-source
baseurl=${BASE_URL}/el/7/SRPMS
repo_gpgcheck=1
gpgcheck=0
enabled=1
gpgkey=${BASE_URL}/gpgkey
sslverify=1
sslcacert=/etc/pki/tls/certs/ca-bundle.crt
metadata_expire=300
EOF

After repo files created, let's update yum's cache with packges from newly added repo

sudo yum -q makecache -y --disablerepo='*' --enablerepo='altinity*'

Packages can be installed the same way as in section Install packages after script-based installation.

Now we have ClickHouse RPM packages available for easy installation.