Java NIO(New IO)

本贴最后更新于 1245 天前,其中的信息可能已经渤澥桑田

Java NIO(New IO 或 Non Blocking IO)是从 Java 1.4 版本开始引入的一个新的 IO API,可以替代标准的 Java IO API。NIO 支持面向缓冲区的、基于通道的 IO 操作。NIO 将以更加高效的方式进行文件的读写操作。

java IO 与 java NIO 的区别

QQ 截图 20201031111739.png

一、通道(Channel)与缓冲区(Buffer)

若需要使用 NIO 系统,需要获取用于连接 IO 设备的通道以及用于容纳数据的缓冲区。然后操作缓冲区,对数据进行处理。简而言之,Channel 负责传输, Buffer 负责存储。

1、缓冲区(Buffer)

缓冲区(Buffer) :一个用于特定基本数据类型的容器。由 java.nio 包定义的,所有缓冲区都是 Buffer 抽象类的子类。
Java NIO 中的 Buffer 主要用于与 NIO 通道进行交互,数据是从通道读入缓冲区,从缓冲区写入通道中的。

20170306220636876.png.png

Buffer 的常用方法

20170306220756805.png.png

非直接缓冲区

20170306223201479.png

直接缓冲区

20170306223221698.png

/*
 * 一、缓冲区(Buffer):在java NIO 中负者数据的存储。缓冲区就是数组。用于存储不同类型的数据。
 * 
 * 根据数据类型的不同(boolean 除外),有以下 Buffer 常用子类:
 * ByteBuffer
 * CharBuffer
 * ShortBuffer
 * IntBuffer
 * LongBuffer
 * FloatBuffer
 * DoubleBuffer
 * 
 * 上述缓冲区的管理方式几乎一致,通过allocate()获取缓冲区
 * 
 * 二、缓冲区存取数据的两个核心方法:
 * put():存入数据到缓冲区中
 *       put(byte b):将给定单个字节写入缓冲区的当前位置
 *       put(byte[] src):将 src 中的字节写入缓冲区的当前位置
 *       put(int index, byte b):将指定字节写入缓冲区的索引位置(不会移动 position)
 * get():获取缓存区中的数据
 *       get() :读取单个字节
 *       get(byte[] dst):批量读取多个字节到 dst 中
 *       get(int index):读取指定索引位置的字节(不会移动 position)
 *   
 * 三、缓冲区中的四个核心属性:
 * capacity:容量,表示缓冲区中最大存储数据的容量。一旦声明不能改变。
 * limit:界限,表示缓冲区中可以操作数据的大小。(limit后数据不能进行读写)
 * position:位置,表示缓冲区中正在操作数据的位置。
 * mark:标记,表示记录当前position位置。可以通过reset()恢复到mark的位置。
 * 
 * 0<=mark<=position<=limit<=capacity
 * 
 * 四、直接缓冲区与非直接缓冲区:
 * 非直接缓冲区:通过allocate()方法分配缓冲区,将缓冲区建立在JVM的内存中。
 *      
 * 直接缓冲区:通过allocateDirect()方法分配直接缓冲区,将缓冲区建立在物理内存中。可以提高效率
 *          此方法返回的 缓冲区进行分配和取消分配所需成本通常高于非直接缓冲区 。
 *          直接缓冲区的内容可以驻留在常规的垃圾回收堆之外.
 *          将直接缓冲区主要分配给那些易受基础系统的本机 I/O 操作影响的大型、持久的缓冲区。
 *          最好仅在直接缓冲区能在程序性能方面带来明显好处时分配它们。
 *          直接字节缓冲区还可以过 通过FileChannel 的 map() 方法 将文件区域直接映射到内存中来创建 。该方法返回MappedByteBuffe
 */
public class TestBuffer {
    @Test
    public void test1(){
        String str="abcde";

        //1.分配一个指定大小的缓冲区
        ByteBuffer buf=ByteBuffer.allocate(1024);

        System.out.println("--------------allocate()----------------");
        System.out.println(buf.position());//0
        System.out.println(buf.limit());//1024
        System.out.println(buf.capacity());//1024

        //2.利用put()存放数据到缓冲区中
        buf.put(str.getBytes());

        System.out.println("-------------put()-------------");
        System.out.println(buf.position());//5
        System.out.println(buf.limit());//1024
        System.out.println(buf.capacity());//1024

        //3.切换读取数据模式
        buf.flip();
        System.out.println("--------------flip()------------");
        System.out.println(buf.position());//0
        System.out.println(buf.limit());//5
        System.out.println(buf.capacity());//1024

        //4.利用get()读取缓冲区中的数据
        byte[] dst=new byte[buf.limit()];
        buf.get(dst);
        System.out.println(new String(dst,0,dst.length));//abcd

        System.out.println("--------------get()------------");
        System.out.println(buf.position());//5
        System.out.println(buf.limit());//5
        System.out.println(buf.capacity());//1024

        //5.rewind():可重复读
        buf.rewind();

        System.out.println("--------------rewind()------------");
        System.out.println(buf.position());//0
        System.out.println(buf.limit());//5
        System.out.println(buf.capacity());//1024

        //6.clear():清空缓冲区。但是缓冲区中的数据依然存在,但是处在“被遗忘”状态
        buf.clear();

        System.out.println("--------------clear()------------");
        System.out.println(buf.position());//0
        System.out.println(buf.limit());//1024
        System.out.println(buf.capacity());//1024

        System.out.println((char)buf.get());
    }

    @Test
    public void test2(){
        String str="abcde";

        ByteBuffer buf=ByteBuffer.allocate(1024);

        buf.put(str.getBytes());

        buf.flip();

        byte[] dst=new byte[buf.limit()];
        buf.get(dst,0,2);
        System.out.println(new String(dst,0,2));//ab
        System.out.println(buf.position());//2

        //mark():标记
        buf.mark();

        buf.get(dst,2,2);//再读两个位置
        System.out.println(new String(dst, 2, 2));//cd
        System.out.println(buf.position());//4

        //reset():恢复到mark的位置
        buf.reset();
        System.out.println(buf.position());//2

        //判断缓冲区中是否还有剩余数据
        if(buf.hasRemaining()){
            //获取缓冲区中可以操作的数量
            System.out.println(buf.remaining());//3
        }
    }

    @Test
    public void test3(){
        //分配直接缓冲区
        ByteBuffer buf=ByteBuffer.allocate(1024);
        System.out.println(buf.isDirect());//false
    }
}

2、通道(Channel)

通道:由 java.nio.channels 包定义。
Channel 表示 IO 源与目标打开的连接。
Channel 类似于传统的“流”。但其自身不能直接访问数据,Channel 只能与 Buffer 进行交互。

20170307142810671.png

操作系统中:通道是一种通过执行通道程序管理 I/O 操作的控制器,它使主机(CPU 和内存)与 I/O 操作之间达到更高的并行程度。需要进行 I/O 操作时,CPU 只需启动通道,然后可以继续执行自身程序,通道则执行通道程序,管理与实现 I/O 操作。

FileChannel 的常用方法

20170307160217273.png

/*
 * 一、通道(Channel):用于源节点与目标节点的连接。在java NIO中负责缓冲区中数据的传输。Channel本身不存储数据,需要配合缓冲区进行传输。
 * 
 * 二、通道的主要实现类
 *    java.nio.channels.Channel 接口:
 *        |--FileChannel:用于读取、写入、映射和操作文件的通道。
 *        |--SocketChannel:通过 TCP 读写网络中的数据。
 *        |--ServerSocketChannel:可以监听新进来的 TCP 连接,对每一个新进来的连接都会创建一个 SocketChannel。
 *        |--DatagramChannel:通过 UDP 读写网络中的数据通道。
 *    
 * 三、获取通道
 * 1.java针对支持通道的类提供了getChannel()方法
 *      本地IO:
 *      FileInputStream/FileOutputStream
 *      RandomAccessFile
 *  
 *      网络IO:
 *      Socket
 *      ServerSocket
 *      DatagramSocket
 *  
 * 2.在JDK 1.7 中的NIO.2 针对各个通道提供了静态方法 open()
 * 3.在JDK 1.7 中的NIO.2 的Files工具类的newByteChannel()
 * 
 * 四、通道之间的数据传输
 * transferFrom()
 * transferTo()
 * 
 * 五、分散(Scatter)与聚集(Gather)
 * 分散读取(Scattering Reads):将通道中的数据分散到多个缓冲区中
 * 聚集写入(Gathering Writes):将多个缓冲区中的数据聚集到通道中
 * 
 * 六、字符集:Charset
 * 编码:字符串-》字符数组
 * 解码:字符数组-》字符串
 */
public class TestChannel {

    //利用通道完成文件的复制(非直接缓冲区)
    @Test
    public void test1(){
        long start=System.currentTimeMillis();

        FileInputStream fis=null;
        FileOutputStream fos=null;

        FileChannel inChannel=null;
        FileChannel outChannel=null;
        try{
            fis=new FileInputStream("d:/1.avi");
            fos=new FileOutputStream("d:/2.avi");

            //1.获取通道
            inChannel=fis.getChannel();
            outChannel=fos.getChannel();

            //2.分配指定大小的缓冲区
            ByteBuffer buf=ByteBuffer.allocate(1024);

            //3.将通道中的数据存入缓冲区中
            while(inChannel.read(buf)!=-1){
                buf.flip();//切换读取数据的模式
                //4.将缓冲区中的数据写入通道中
                outChannel.write(buf);
                buf.clear();//清空缓冲区
            }
        }catch(IOException e){
            e.printStackTrace();
        }finally{
            if(outChannel!=null){
                try {
                    outChannel.close();
                } catch (IOException e) {
                    e.printStackTrace();
                }
            }
            if(inChannel!=null){
                try {
                    inChannel.close();
                } catch (IOException e) {
                    e.printStackTrace();
                }
            }
            if(fos!=null){
                try {
                    fos.close();
                } catch (IOException e) {
                    e.printStackTrace();
                }
            }
            if(fis!=null){
                try {
                    fis.close();
                } catch (IOException e) {
                    e.printStackTrace();
                }
            }
        }
        long end=System.currentTimeMillis();
        System.out.println("耗费时间:"+(end-start));//耗费时间:1094
    }

    //使用直接缓冲区完成文件的复制(内存映射文件)
    @Test
    public void test2() {
        long start=System.currentTimeMillis();

        FileChannel inChannel=null;
        FileChannel outChannel=null;
        try {
            inChannel = FileChannel.open(Paths.get("d:/1.avi"), StandardOpenOption.READ);
            outChannel=FileChannel.open(Paths.get("d:/2.avi"), StandardOpenOption.WRITE,StandardOpenOption.READ,StandardOpenOption.CREATE);

            //内存映射文件
            MappedByteBuffer inMappedBuf=inChannel.map(MapMode.READ_ONLY, 0, inChannel.size());
            MappedByteBuffer outMappedBuf=outChannel.map(MapMode.READ_WRITE, 0, inChannel.size());
            //直接对缓冲区进行数据的读写操作
            byte[] dst=new byte[inMappedBuf.limit()];
            inMappedBuf.get(dst);
            outMappedBuf.put(dst);
        } catch (IOException e) {
            e.printStackTrace();
        }finally{
            if(outChannel!=null){
                try {
                    outChannel.close();
                } catch (IOException e) {
                    e.printStackTrace();
                }
            }
            if(inChannel!=null){
                try {
                    inChannel.close();
                } catch (IOException e) {
                    e.printStackTrace();
                }
            }
        }

        long end=System.currentTimeMillis();
        System.out.println("耗费的时间为:"+(end-start));//耗费的时间为:200
    }

    //通道之间的数据传输(直接缓冲区)
    @Test
    public void test3(){
        long start=System.currentTimeMillis();

        FileChannel inChannel=null;
        FileChannel outChannel=null;
        try {
            inChannel = FileChannel.open(Paths.get("d:/1.avi"), StandardOpenOption.READ);
            outChannel=FileChannel.open(Paths.get("d:/2.avi"), StandardOpenOption.WRITE,StandardOpenOption.READ,StandardOpenOption.CREATE);

            inChannel.transferTo(0, inChannel.size(), outChannel);
            outChannel.transferFrom(inChannel, 0, inChannel.size());
        } catch (IOException e) {
            e.printStackTrace();
        }finally{
            if(outChannel!=null){
                try {
                    outChannel.close();
                } catch (IOException e) {
                    e.printStackTrace();
                }
            }
            if(inChannel!=null){
                try {
                    inChannel.close();
                } catch (IOException e) {
                    e.printStackTrace();
                }
            }
        }
        long end=System.currentTimeMillis();
        System.out.println("耗费的时间为:"+(end-start));//耗费的时间为:147
    }

    //分散和聚集
    @Test
    public void test4(){
        RandomAccessFile raf1=null;
        FileChannel channel1=null;
        RandomAccessFile raf2=null;
        FileChannel channel2=null;
        try {
            raf1=new RandomAccessFile("1.txt","rw");

            //1.获取通道
            channel1=raf1.getChannel();

            //2.分配指定大小的缓冲区
            ByteBuffer buf1=ByteBuffer.allocate(100);
            ByteBuffer buf2=ByteBuffer.allocate(1024);

            //3.分散读取
            ByteBuffer[] bufs={buf1,buf2};
            channel1.read(bufs);

            for(ByteBuffer byteBuffer : bufs){
                byteBuffer.flip();
            }
            System.out.println(new String(bufs[0].array(),0,bufs[0].limit()));
            System.out.println("--------------------");
            System.out.println(new String(bufs[1].array(),0,bufs[1].limit()));

            //4.聚集写入
            raf2=new RandomAccessFile("2.txt", "rw");
            channel2=raf2.getChannel();

            channel2.write(bufs);

        }catch (IOException e) {
            e.printStackTrace();
        }finally{
            if(channel2!=null){
                try {
                    channel2.close();
                } catch (IOException e) {
                    e.printStackTrace();
                }
            }
            if(channel1!=null){
                try {
                    channel1.close();
                } catch (IOException e) {
                    e.printStackTrace();
                }
            }
            if(raf2!=null){
                try {
                    raf2.close();
                } catch (IOException e) {
                    e.printStackTrace();
                }
            }
            if(raf1!=null){
                try {
                    raf1.close();
                } catch (IOException e) {
                    e.printStackTrace();
                }
            }
        }
    }

    //输出支持的字符集
    @Test
    public void test5(){
        Map<String,Charset> map=Charset.availableCharsets();
        Set<Entry<String,Charset>> set=map.entrySet();

        for(Entry<String,Charset> entry:set){
            System.out.println(entry.getKey()+"="+entry.getValue());
        }
    }

    //字符集
    @Test
    public void test6(){
        Charset cs1=Charset.forName("GBK");

        //获取编码器
        CharsetEncoder ce=cs1.newEncoder();

        //获取解码器
        CharsetDecoder cd=cs1.newDecoder();

        CharBuffer cBuf=CharBuffer.allocate(1024);
        cBuf.put("啦啦哈哈吧吧");
        cBuf.flip();

        //编码
        ByteBuffer bBuf=null;
        try {
            bBuf = ce.encode(cBuf);
        } catch (CharacterCodingException e) {
            e.printStackTrace();
        }

        for(int i=0;i<12;i++){
            System.out.println(bBuf.get());//-64-78-64-78-71-2-7-2-80-55-80-55
        }

        //解码
        bBuf.flip();
        CharBuffer cBuf2=null;
        try {
            cBuf2 = cd.decode(bBuf);
        } catch (CharacterCodingException e) {
            e.printStackTrace();
        }
        System.out.println(cBuf2.toString());//啦啦哈哈吧吧
    }
}

二、NIO 的非阻塞式网络通信

传统的 IO 流都是阻塞式的。也就是说,当一个线程调用 read() 或 write()时,该线程被阻塞,直到有一些数据被读取或写入,该线程在此期间不能执行其他任务。因此,在完成网络通信进行 IO 操作时,由于线程会阻塞,所以服务器端必须为每个客户端都提供一个独立的线程进行处理,当服务器端需要处理大量客户端时,性能急剧下降。

Java NIO 是非阻塞模式的。当线程从某通道进行读写数据时,若没有数据可用时,该线程可以进行其他任务。线程通常将非阻塞 IO 的空闲时间用于在其他通道上执行 IO 操作,所以单独的线程可以管理多个输入和输出通道。因此,NIO 可以让服务器端使用一个或有限几个线程来同时处理连接到服务器端的所有客户端。

选择器(Selector)
选择器(Selector) 是 SelectableChannle 对象的多路复用器,Selector 可以同时监控多个 SelectableChannel 的 IO 状况,也就是说,利用 Selector 可使一个单独的线程管理多个 Channel。Selector 是非阻塞 IO 的核心。

/*
 * 一、使用NIO 完成网络通信的三个核心:
 * 
 * 1、通道(Channel):负责连接
 *      java.nio.channels.Channel 接口:
 *           |--SelectableChannel
 *               |--SocketChannel
 *               |--ServerSocketChannel
 *               |--DatagramChannel
 *             
 *               |--Pipe.SinkChannel
 *               |--Pipe.SourceChannel
 *             
 * 2.缓冲区(Buffer):负责数据的存取
 * 
 * 3.选择器(Selector):是 SelectableChannel 的多路复用器。用于监控SelectableChannel的IO状况
 */
public class TestBlockingNIO {//没用Selector,阻塞型的

    //客户端
    @Test
    public void client() throws IOException{
        SocketChannel sChannel=SocketChannel.open(new InetSocketAddress("127.0.0.1",9898));
        FileChannel inChannel=FileChannel.open(Paths.get("1.jpg"), StandardOpenOption.READ);
        ByteBuffer buf=ByteBuffer.allocate(1024);
        while(inChannel.read(buf)!=-1){
            buf.flip();
            sChannel.write(buf);
            buf.clear();
        }
        sChannel.shutdownOutput();//关闭发送通道,表明发送完毕

        //接收服务端的反馈
        int len=0;
        while((len=sChannel.read(buf))!=-1){
            buf.flip();
            System.out.println(new String(buf.array(),0,len));
            buf.clear();
        }
        inChannel.close();
        sChannel.close();
    }

    //服务端
    @Test
    public void server() throws IOException{
        ServerSocketChannel ssChannel=ServerSocketChannel.open();
        FileChannel outChannel=FileChannel.open(Paths.get("2.jpg"), StandardOpenOption.WRITE,StandardOpenOption.CREATE);
        ssChannel.bind(new InetSocketAddress(9898));
        SocketChannel sChannel=ssChannel.accept();
        ByteBuffer buf=ByteBuffer.allocate(1024);
        while(sChannel.read(buf)!=-1){
            buf.flip();
            outChannel.write(buf);
            buf.clear();
        }

        //发送反馈给客户端
        buf.put("服务端接收数据成功".getBytes());
        buf.flip();//给为读模式
        sChannel.write(buf);

        sChannel.close();
        outChannel.close();
        ssChannel.close();
    }
}

SelectionKey
当调用 register(Selector sel, int ops) 将通道注册选择器时,选择器对通道的监听事件,需要通过第二个参数 ops 指定。
可以监听的事件类型(用 可使用 SelectionKey 的四个常量 表示):

  • 读 : SelectionKey.OP_READ (1)
  • 写 : SelectionKey.OP_WRITE (4)
  • 连接 : SelectionKey.OP_CONNECT (8)
  • 接收 : SelectionKey.OP_ACCEPT (16)

若注册时不止监听一个事件,则可以使用“位或”操作符连接。

SelectionKey:表示 SelectableChannel 和 Selector 之间的注册关系。每次向选择器注册通道时就会选择一个事件(选择键)。选择键包含两个表示为整数值的操作集。操作集的每一位都表示该键的通道所支持的一类可选择操作。

20170307221121398.png

Selector 的常用方法

20170307221300196.png

public class TestNonBlockingNIO {
    //客户端
    @Test
    public void client()throws IOException{
        //1.获取通道
        SocketChannel sChannel=SocketChannel.open(new InetSocketAddress("127.0.0.1", 9898));
        //2.切换非阻塞模式
        sChannel.configureBlocking(false);
        //3.分配指定大小的缓冲区
        ByteBuffer buf=ByteBuffer.allocate(1024);
        //4.发送数据给服务端
        Scanner scan=new Scanner(System.in);
        while(scan.hasNext()){
            String str=scan.next();
            buf.put((new Date().toString()+"\n"+str).getBytes());
            buf.flip();
            sChannel.write(buf);
            buf.clear();
        }
        //5.关闭通道
        sChannel.close();
    }

    //服务端
    @Test
    public void server() throws IOException{
        //1.获取通道
        ServerSocketChannel ssChannel=ServerSocketChannel.open();

        //2.切换非阻塞式模式
        ssChannel.configureBlocking(false);

        //3.绑定连接
        ssChannel.bind(new InetSocketAddress(9898));

        //4.获取选择器
        Selector selector=Selector.open();

        //5.将通道注册到选择器上,并且指定“监听接收事件”
        ssChannel.register(selector,SelectionKey.OP_ACCEPT);

        //6.轮询式的获取选择器上已经“准备就绪”的事件
        while(selector.select()>0){

            //7.获取当前选择器中所有注册的“选择键(已就绪的监听事件)”
            Iterator<SelectionKey> it=selector.selectedKeys().iterator();

            while(it.hasNext()){
                //8.获取准备“就绪”的事件
                SelectionKey sk=it.next();

                //9.判断具体是什么时间准备就绪
                if(sk.isAcceptable()){
                    //10.若“接收就绪”,获取客户端连接
                    SocketChannel sChannel=ssChannel.accept();

                    //11.切换非阻塞模式
                    sChannel.configureBlocking(false);

                    //12.将该通道注册到选择器上
                    sChannel.register(selector, SelectionKey.OP_READ);
                }else if(sk.isReadable()){
                    //13.获取当前选择器上“读就绪”状态的通道
                    SocketChannel sChannel=(SocketChannel)sk.channel();
                    //14.读取数据
                    ByteBuffer buf=ByteBuffer.allocate(1024);
                    int len=0;
                    while((len=sChannel.read(buf))>0){
                        buf.flip();
                        System.out.println(new String(buf.array(),0,len));
                        buf.clear();
                    }
                }
                //15.取消选择键SelectionKey
                it.remove();
            }
        }
    }
}

DatagramChannel
Java NIO 中的 DatagramChannel 是一个能收发 UDP 包的通道。

public class TestNonBlockNIO2 {
    @Test
    public void send() throws IOException{
        DatagramChannel dc=DatagramChannel.open();
        dc.configureBlocking(false);
        ByteBuffer buf=ByteBuffer.allocate(1024);
        Scanner scan=new Scanner(System.in);
        while(scan.hasNext()){
            String str=scan.next();
            buf.put((new Date().toString()+"\n"+str).getBytes());
            buf.flip();
            dc.send(buf, new InetSocketAddress("127.0.0.1", 9898));
            buf.clear();
        }
        dc.close();
    }

    @Test
    public void receive() throws IOException{
        DatagramChannel dc=DatagramChannel.open();
        dc.configureBlocking(false);
        dc.bind(new InetSocketAddress(9898));
        Selector selector=Selector.open();
        dc.register(selector, SelectionKey.OP_READ);
        while(selector.select()>0){
            Iterator<SelectionKey> it=selector.selectedKeys().iterator();
            while(it.hasNext()){
                SelectionKey sk=it.next();

                if(sk.isReadable()){
                    ByteBuffer buf=ByteBuffer.allocate(1024);
                    dc.receive(buf)
;
                    buf.flip();
                    System.out.println(new String(buf.array(),0,buf.limit()));
                    buf.clear();
                }
            }
            it.remove();
        }
    }
}

管道 (Pipe)
Java NIO 管道是 2 个线程之间的单向数据连接。Pipe 有一个 source 通道和一个 sink 通道。数据会被写到 sink 通道,从 source 通道读取。

20170308154828966.png

public class TestPipe {
    @Test
    public void test1()throws IOException{
        //1.获取管道
        Pipe pipe=Pipe.open();
        //2.将缓冲区中的数据写入管道
        ByteBuffer buf=ByteBuffer.allocate(1024);
        Pipe.SinkChannel sinkChannel=pipe.sink();
        buf.put("通过单向管道发送数据".getBytes());
        buf.flip();
        sinkChannel.write(buf);

        //3.读取缓冲区中的数据
        Pipe.SourceChannel sourceChannel=pipe.source();
        buf.flip();
        int len=sourceChannel.read(buf);
        System.out.println(new String(buf.array(),0,len));

        sourceChannel.close();
        sinkChannel.close();
    }
}

三、NIO.2 – Path 、Paths 、Files

Path 与 Paths

  • java.nio.file.Path 接口代表一个平台无关的平台路径,描述了目录结构中文件的位置。
  • Paths 提供的 get() 方法用来获取 Path 对象:Path get(String first, String … more) : 用于将多个字符串串连成路径。
  • Path 常用方法:
    • boolean endsWith(String path) : 判断是否以 path 路径结束
    • boolean startsWith(String path) : 判断是否以 path 路径开始
    • boolean isAbsolute() : 判断是否是绝对路径
    • Path getFileName() : 返回与调用 Path 对象关联的文件名
    • Path getName(int idx) : 返回的指定索引位置 idx 的路径名称
    • int getNameCount() : 返回 Path 根目录后面元素的数量
    • Path getParent() :返回 Path 对象包含整个路径,不包含 Path 对象指定的文件路径
    • Path getRoot() :返回调用 Path 对象的根路径
    • Path resolve(Path p) :将相对路径解析为绝对路径
    • Path toAbsolutePath() : 作为绝对路径返回调用 Path 对象
    • String toString() : 返回调用 Path 对象的字符串表示形式

Files 类
java.nio.file.Files 用于操作文件或目录的工具类。

  • Files 常用方法:
    • Path copy(Path src, Path dest, CopyOption … how) : 文件的复制
    • Path createDirectory(Path path, FileAttribute< ? > … attr) : 创建一个目录
    • Path createFile(Path path, FileAttribute< ? > … arr) : 创建一个文件
    • void delete(Path path) : 删除一个文件
    • Path move(Path src, Path dest, CopyOption…how) : 将 src 移动到 dest 位置
    • long size(Path path) : 返回 path 指定文件的大小
  • Files 常用方法:用于判断
    • boolean exists(Path path, LinkOption … opts) : 判断文件是否存在
    • boolean isDirectory(Path path, LinkOption … opts) : 判断是否是目录
    • boolean isExecutable(Path path) : 判断是否是可执行文件
    • boolean isHidden(Path path) : 判断是否是隐藏文件
    • boolean isReadable(Path path) : 判断文件是否可读
    • boolean isWritable(Path path) : 判断文件是否可写
    • boolean notExists(Path path, LinkOption … opts) : 判断文件是否不存在
    • public static < A extends BasicFileAttributes> A readAttributes(Path path,Class< A > type,LinkOption…options) : 获取与 path 指定的文件相关联的属性。
  • Files 常用方法:用于操作内容
    • SeekableByteChannel newByteChannel(Path path, OpenOption…how) : 获取与指定文件的连接,how 指定打开方式。
    • DirectoryStream newDirectoryStream(Path path) : 打开 path 指定的目录
    • InputStream newInputStream(Path path, OpenOption…how):获取 InputStream 对象
    • OutputStream newOutputStream(Path path, OpenOption…how) : 获取 OutputStream 对象
  • NIO
    15 引用 • 26 回帖 • 1 关注

相关帖子

欢迎来到这里!

我们正在构建一个小众社区,大家在这里相互信任,以平等 • 自由 • 奔放的价值观进行分享交流。最终,希望大家能够找到与自己志同道合的伙伴,共同成长。

注册 关于
请输入回帖内容 ...